Educational 3D printing parameters Kit.
About Fused Filament Fabrication Technology (FFF)
Fused Deposition Modeling (FDM), or Fused Filament Fabrication (FFF), is an additive manufacturing process that deposits a thermoplastic material layer-by-layer in order to build a part. FFF technology manufactures strong, durable and dimensionally stable objects with an unmatched accuracy.
Among the multiple 3D Printing technologies in the market, FFF is the most widely spread because of several reasons. First of all, both the hardware and material are affordable, requiring a low initial investment. Secondly, there is a large range of materials available, so the technology is suitable for multiple applications and markets. Finally, the design criteria needed and equipment operation are simple enough, especially compared with other 3D Printing technologies, so there is no need for specialized operators or complex training.
The technology supports industrial-grade thermoplastics such as Nylon, TPU, PET-G or ABS, among others. Check out the BCN3D Filaments, our portfolio of materials.
FFF most important parameters and its influence
Every 3D print starts with a digital design of an object, which is then divided in thin layers with a software called slicer. The layer split is made in order to print in the XY plane and then give volume through the Z axis. When using BCN3D Printers we recommend the usage of the slicer BCN3D cura, a free and easy-to-use software entirely optimized for our printers.
When printing a digital design, a slicer is required in order to select the material and the quality of the print. All the parameters described in this article are automatically calculated by the software BCN3D Cura, so the user doesn’t need to know any of them. Nevertheless, it is important to define them and know how they influence in the quality of the part and the printing time. The most important ones are explained below and they are Layer Height, Infill, Shells, Printing Speed, Temperature, Overhangs.
· LAYER HEIGHT
The layer height is an implicit parameter in all 3D printing processes. Geometries are generated in the XY plane and then extruded along Z axis. This extrusion is made with layers, whose height can be modified to obtain the desired result. These layers are defined with BCN3D Cura Software.
Modifying layer height
There are two major factors that may influence when choosing layer height. First of all the printing quality, because the layer height is equivalent to the vertical resolution of Z axis. Lower layer heights will result in smoother prints, because the number of layers will increase so will do the number of points that define Z axis.
The second factor is the printing speed, because when decreasing the layer height, the total number of layers is higher, so does the printing time.
All in all, for low values of layer height, the resulting part will be smoother but will also take more time to print it. Thus, high values for layer height result in a loss of resolution but faster prints. Therefore, the designer has to chose whether time or resolution is more important. It is normally considered a high-quality part when the layer height is below 0.15mm, and low quality when this value is above 0.3mm. In the next picture, there are shown different types of layer height from 0.1mm to 0.3mm.
· INFILL AND SHELLS
When 3D printing with FFF technology, most of the parts are not printed completely solid. Printing a solid part means wasting a lot of material and spending a long time printing, and that means increased costs. Instead, these parts are filled with less material and wrapped with shells. In this picture, it can be appreciated the difference between each part.
Despite this first classification, shells can be broken down into different types depending on their position.
- Walls: the shells placed by the sides of the model.
- Bottom layers: the shells between the infill and the build plate. They are the first printed layers.
- Top layers: the shells between the infill and the nozzle. They are the last printed layers.
- Infill: the internal structure or the skeleton of the part.
Strength can be improved by adding shells, which will also take more printing time and material. The wall thickness is the value of the nozzle diameter, so the size of the wall must be a multiple of the diameter to prevent voids between shells. The recommended number of shells in BCN3D Cura is 3, but it can be easily changed to the desired number. Below are shown different numbers of shells from 1 to 5.
FFF parts are usually printed with a low value of infill, around 20%. Infill is measured from 0% to 100%, being 0% a completely emptied part and 100% a completely filled part. The idea is to reduce time and material, keeping mechanical properties. When increasing the percentage it also increases the strength of the design. So, if it is necessary to print a prototype the infill should be around 15%, whereas if it is a final part the infill should be more than 50%. Below are shown different infills from 0% to 100%.
· PRINTING SPEED
Printing speed is the speed at which printing happens. This speed depends on the material, size of the nozzle, layer height, etc. It is a key factor to get the highest quality in printed parts. Printing speed has an important influence on time. For small models there is practically no difference between slow and fast printing speed, but for large models it makes a remarkable difference.
The temperature at which occurs the print depends on the type of material and the quantity of material going through the nozzle. Each material has its theoretical melting point, but when 3D printing it exists a range of melting temperatures. The melting happens in the nozzle and it is instantaneous. Due to this factor and the presence of additives to improve the printing experience, the range temperature is noticeably above the melting point of the material.
The optimal temperature is the lowest temperature that can melt the material completely. If the temperature is too low, the nozzle can have problems with clogging because of the non-melted material.
· OVERHANGS AND BRIDGING
Because of the manufacturing strategy, sometimes it is required to build auxiliary support structures for those models with overhangs shallower than 45º from the horizontal plane.
In the case of printers that only have one extruder instead of a dual extruder system, once the model is printed, it is necessary to perform a manual and time-consuming operation to remove the supports. This process affects the quality surface between the model and the supports and also increases the chances of breaking the part. In addition, depending on the geometry of the model it can be impossible to totally remove the supports by hand.
However, BCN3D Technologies proposition uses IDEX architecture to counteract the described disadvantage. IDEX stands for Independent Dual Extruder, a unique system that allows to print support structures properly and ensures the finest surface finish. Most of the other printers featuring Dual Extrusion have both toolheads in the same carriage. However, IDEX architecture allows to park the idle carriage aside, preventing the dripping of molten plastic onto the part and improving the overall quality.
Moreover, this architecture of all BCN3D printers also adds differentiating advantages. First of all, it is possible to combine different materials, like rigid and flexible, or to use two colors to get more attractive or aesthetic models. Last but not least, IDEX opens the door to new printing strategies, allowing to use different tool sizes to cut down printing times without giving away quality.
When considering the use of supports in a print, there are two types of structures that are critical. Bridging is a structure between two points at the same height without any solid below. With BCN3D Cura, these structures may be printed without supports if the distance is not too long, and the temperature and speed let the material cool fast and keep its rigidity. In the picture below, there is a bridging test, in which a distance of 150mm has been printed correctly.
Overhangs are solid parts forming an angle with the normal of the base plane. When this angle is above 45º, supports are in most cases mandatory. But, structures with angles between 45º and 80º can be printed without supports reducing temperature and speed. In this picture, there is a structure with a variable angle from 0 to 85º, to see the evolution of the bottom layers quality. In BCN3D Cura we recommend activating the option Generate Support in order to get a better 3D print.
Would you like to better know any of the parameters described? Contact us at firstname.lastname@example.org , we love hearing from you!